Disc Brake Setup for 2009 Easyloader Boat Trailer
Question:
I have a single axle 2009 Easyloader boat trailer model 17-20 3100. Does it have drum or disc brakes? If drum I would like to switch to disc with stainless calipers and oil bath bearings. What specific equipment would you recommend , including the actuator? Thank you!
asked by: Craig S
Helpful Expert Reply:
I am not sure what type of brakes your 2009 Easyloader boat trailer model 17-20 3100 currently has. Based off of the information you have provided me I would be happy to make a recommendation of a disc brake set up for your boat trailer. You're going to need a different surge brake actuator for disc brakes. I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator item # 099-175-20. This actuator has a connector for a 2" Ball, is zinc plated for corrosion protection and is rated up to 7,500 lbs. The Dexter actuator comes with an electric lockout and breakaway kit.
If you need new brake lines you will need the Kodiak Hydraulic Brake Line Kit - Single Axle - 18' item # 18SI-BLKIT. This brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Includes 18', 7', and 1-1/2' flexible hoses with swivel fittings; a tee fitting; and hardware. I also recommend the Titan Hydraulic Brake Line with Fittings - 18-25/32" Long item # T0776500. This will give you a longer flexible brake line that you don't have to worry about being broken off.
The Kodiak Disc Brake Kit - 10" Hub/Rotor item # K2HR35D you were looking at will work for your trailer if you have a 3,500 lbs axle, bearing sizes inner bearing item # L68149 outer bearing item # L44649 and wheels with a 5 on 4 1/2 lug nut pattern.
Products Referenced in This Question
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Kits
- Single Axle
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Dexter Hydraulic Brake Line with Fittings - 18-25/32" Long
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18-25/32 Inch Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Components
- Dexter
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Article: How to Bleed Your Trailer Surge Brakes
- Video: Titan Brake Actuator - Surge Brake Actuator - T43397007K Review
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Video: etrailer Uni-Servo Free Backing Hydraulic Brake Kit Installation
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-7-D Review
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM72VR
- Search Results: oil hub cap
- Search Results: reliable oil bath hubs
- Search Results: reliable oil bath cap
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Q&A: Recommended Surge Brake Actuator For Drum Brakes To Replace Older Atwood 61101 Actuator
- Q&A: Can the Replacement Atwood Master Cylinder 85736 Still Be Obtained
- Q&A: Can Dexter Actuator # T47457007K Replace Titan Model 60
- Video: etrailer Trailer Brakes AKFBBRK-7R-D Review
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM62VR
- Q&A: Recommended Replacement Surge Brake Actuator For An Atwood 85778
- Q&A: Recommended Brakes for 4300-lbs Axle with 5 Bolt Mounting Flange and 15" Wheels
- Q&A: Replacement Brake Assemblies for Dexter Axle 12" Free Backing Hydraulic Brakes
- Q&A: Replacement Surge Brake Actuator For Atwood 85736 That Is Discontinued