What Replacement Spindle Do I Need for a Dexter 69-46 Spindle?
Question:
Does the Spindle screw into this axel? If yes how would you unscrew it? Pipe wrench? Need to replace bearings and spindles. Can you help me to know what bearings and spindles to order. Thank you for your time.
asked by: Tracy Z
Expert Reply:
As far as removing your current spindle, you will need to grind/drill off the old one. One the old spindle is removed, I recommend the BT8 Spindle for 2,000-lb Trailer Axles # TRU59FR (for a 1-3/8 diameter) or the # TRU94FR (for 1-1/4 diameter). The measurement of the diameter is the stub (innermost tube on the spindle). In order to get the correct size, I recommend measuring the stub of your old spindle once it is removed. I went ahead and attached videos of both of these spindles in order to give you more perspective.
If you need the correct bearings, races, and grease seals, those are the following parts:
- Replacement Trailer Hub Bearing # L44649
- Replacement Race # L44610
- Grease Seal # 10-9
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Left Hand - 2,500 lbs
- Shop: RV Covers
- Video: Dexter Axle Trailer Brakes 23-398 Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hydraulic Brakes for a 2000 Jayco Eagle UDST Pop-Up Camper
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Search Results: dx66
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Q&A: How To Determine Axle Rating Of Dexter Torsion Axles
- Q&A: Best Replacement for a Dexter 69 - 46 A2 Axle
- Search Results: 44649
- Video: Solera Replacement Awning Fabric Measurement and Installation
- Shop: Trailer Hitch
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Trailer Wiring Diagrams
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: 25580
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Video: Choosing the Right Trailer Wiring
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Shop: Fifth Wheel Hitch
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: dust cap
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Shop: Brake Controller
- Article: How to Charge a Dump Trailer Battery