Do Trailer Spindles Just Weld to End of Axle
Question:
Hello, I have a 50 yr old boat trailer that I’m replacing all the spindles due to wear. The trailer has 1-1/2” Solid square axles. The trailer has a 4” and the spindles look like they were machined before the s were formed onto the axels. Obviously, the existing spindle will need to be cut off so the new spindle can be welded back on. My question is is the proper weld going to be a butt weld ? Also, I imagine that a butt weld will require both the spindle and axel be beveled to accept the weld. That said, how much beveling of the two pieces needs to be done? Keeping in mind, we are welding 1-1/2” of solid steel. Thanks
asked by: Bob
Expert Reply:
So the install of a spindle like the # TRU97FR really needs to be done by a welder who has done the job before and has the special jigs for the job. It's a precision job and we can't recommend a method for it aside from taking it to someone who is equipped for it. Otherwise your alignment will be off.
Product Page this Question was Asked From
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: axle
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Search Results: gate spring
- Search Results: deck screws
- Shop: Dexstar Silver Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2
- Search Results: tire only
- Search Results: tire
- Q&A: Wiring 3-Wire Breakaway Switch as Replacement for 2-Wire Switch
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: grease
- Search Results: screws
- Shop: 2-1/2" Long Torx Floor Screws, 40/Pkg
- Shop: LubriMatic Moly EP Grease - 14-oz Cartridge
- Shop: Trailer Wiring
- Shop: Ramp Spring - 2K Torque for 1-1/2" Round Shaft - LH
- Shop: Replacement Double Torsion Spring for Diamond Snow Plow - 4-3/4" Wide x 8-1/2" Long
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327864
- Video: Review of etrailer by AxleTek Trailer Axles - 7,000 lbs 94 Inch Easy Grease Axle - e93GR
- Q&A: Available 12 x 2-Inch 6K-Rated Electric Trailer Brakes with 4-Bolt Mounting Pattern
- Q&A: Trailer Brake Assemblies for AL Ko 5200 lb Axles
- Q&A: Brake Assemblies that Fit Hayes 7k Brake Assemblies with 4-Bolt Mounting Pattern
- Q&A: Differences Between # 23-458 and #23-106-00 12 by 2 Inch Brake Assemblies
- Q&A: Compatibility of 12 Inch Nev-R-Adjust Electric Brake Assembly for 6K Axles w/6 on 5-1/2 Hub & Drum
- Q&A: What is the Diameter of the Axle Cutout in Dexter 6,000 lb Electric Brake Assemblies
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Article: Most Popular Wheel Bearings
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Video: Dexter Electric Brake Assembly Review
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU97FR
on Trailer Spindles
