What Tonneau Cover Options Are There For A 2020 GMC Sierra 3500 With 8 Foot Bed.

Question

Question:

What Tonneau cover options are there for a 2020 GMC Sierra 3500 with an 8 foot bed?

asked by: Howard S

0

Expert Reply:

I recommend the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # PE54UV will fit the 2020 GMC Sierra 3500. It is retractable and has a built in pull strap to make opening it easier.

We also have the Leer Hard Tonneau Cover - Quad Fold - Fiberglass Reinforced Plastic # LE67FR which is a quad-fold, hard tonneau that will cover 1/4 of your truck bed when fully folded up.

expert reply by: David B

0

Answer 1

45 PSI is as low as you can go per tire for a 3,800 lbs trailer. The Goodyear Endurance ST225/75R15 Radial Tire item #LH33FR, you were looking at, is a load range E tire with a maximum capacity of 2,830lbs at 80 PSI per tire. The air pressure can be…

view full answer...

Answer 2

The Roadmaster Quiet Hitch, #RM-062, does fit 2-1/2 inch receivers like the one on your 2009 Chevy Silverado 2500 but it is made for flat towing only (towing a vehicle behind a motor home) and is not rated for towing. Towing a trailer produces more…

view full answer...

Answer 3

Yes, I confirmed with Leer that the Leer Hard Tonneau Cover - Quad Fold #LE67FR will work with your multipro tailgate on your 2021 GMC Sierra 3500 (6-3/4 ft. bed with crew cab).

view full answer...

Answer 4

I don't have a video I can share with you, so the attached photos are the best I can do to hopefully give you an better idea of how the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 20' to 28' Long Power Boat #AR84FR work.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 7

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 12

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

What Tonneau Cover Options Are There For A 2020 GMC Sierra 3500 With 8 Foot Bed.

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching