bing tracking image
Q & A Icon

Trouble with Removal of Thule T2 Add-On  

Question:

I have removed the two bolts in the shaft but I cant get the add on to slide out of the rack. I have missed another bolt or screw to remove? Thanks.

0

Expert Reply:

Other than the two bolts in the shaft the only thing left to be done when trying to remove the 2 Bike Add-On for Thule T2 Pro XTB # TH9036XT would be to loosen the linkage using the hex key. The linkage is threaded into the center bolt hole below where the Add-On piece slides in.

If you have already done that as well, then you are not missing anything else that needs to be removed. It is likely binding up from shifting around during use. Try moving it around and trying to remove it with different angles/pressure spots. You may also find it helpful to use some sort of lubricant like a WD-40 and wiggling the add-on back and forth while trying to slide the add-on out.

expert reply by:
0
Scott S

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.