Recommended Trailer Hitch Receiver For 2020 Toyota Camry To Carry Bike Rack
Question:
Is there a class two hitch with a 2inch receiver for my 2020 Toyota Camry 2.5L Nightshade SE? My bike rack requires a 2inch receiver.
asked by: Chris B
Expert Reply:
I have a different option for you, but there is not a 2" trailer hitch receiver available for your 2020 Toyota Camry 2.5L Nightshade SE.
Starting with the trailer hitch receiver I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I # C11576 which is the only trailer hitch receiver available for your vehicle. It has a 200lb tongue weight rating and 2000lb trailer weight rating.
Depending on the weight of your bike rack and bikes you may be able to use them by using the Curt Expander # C45785 to convert the 1-1/4" receiver to 2", but using a hitch adapter will reduce the capacities of your trailer hitch by 50% so you will need to verify that your bike rack and bikes do not exceed 100lbs. Class I hitches are limited to carrying only 2 bikes.
If your rack and bikes exceed the 100 lbs, then you will need to use a different bike rack. I recommend the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack # TH934XTR which will fit the 1-1/4" receiver perfectly and will accommodate four bikes weighing up to 35lbs each. Even though it will carry 4 bikes, you will be limited to only 2 on the class I hitch.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 6 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- CURT
more information >
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
- Hitch Bike Racks
- Hanging Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Locks Not Included
- 4 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Thule
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Q&A: Recommended Spare Tire Cover for 265/70R17 Size Tire
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement Double Lip Grease Seals for Boat Trailer Grease Seal # 171255UC
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Is the Aluminum A-Frame Trailer Tongue Toolbox 350970 Waterproof
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: 2023 Best Gifts for Haulers & Towers
- Article: Where to Position the Trailer Axle?
- Article: Routing the Power Wire for a Trailer Wiring Harness