Can I Swap Spring Bars on a Blue Ox Sway Pro System For Different Sized Trailers

Question

Question:

I have a 2018 Ram 2500 w/ 2.5inch receiver hitch, I will be towing a 18foot enclosed trailer with a gross weight of 7000lb and also a 28foot tiny home that may top out around 15000lb gross. Can I use the BXW2000 Weight Distribution hitch and swap out the bars for Blue Ox part BXW4006 when I want to tow the enclosed trailer? Will the BXW4006 bars work with the BXW2000 assembly??

asked by: Amos

0

Expert Reply:

Yes. You can use the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 20,000 lbs GTW, 2,000 lbs TW # BXW2000 with the smaller Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System - 750 lbs TW # BXW4006. The spring bars on these systems can be swapped out as needed to allow you to have the proper bar size on the weight distribution system.

expert reply by: Erik B

0

Answer 1

The Blue Ox weight distribution heads are not interchangeable with Reese systems if that's what you are wanting to do but if you were asking if the Blue Ox system rated for 2,000 lb tongue weight would be stiffer than what you have now the answer…

view full answer...

Answer 2

The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear…

view full answer...

Answer 3

Based on the amount of tongue weight your trailer has (1600+) the Reese Strait-Line weight distribution system, #RP66075, is one option. It is rated for 1,000 to 1,700 pounds tongue weight so as long as you stay within that range this system will…

view full answer...

Answer 4

If your Class V trailer hitch on your Dodge truck has a 2-1/2 inch receiver opening I recommend the Blue Ox SwayPro Weight Distribution, part #BXW2000. This system has a 20,000-lb towing capacity and is designed for tongue weight between 1,500 and…

view full answer...

Answer 5

The tongue weight range for the Blue Ox weight distribution system part #BXW2000 is 1,500 to 2,000 lbs. If your tongue weight falls in that range this system will work great. The bars are designed to have a bit of bend in them when they are set up…

view full answer...

Answer 6

The Blue Ox Swaypro part #BXW2000 has a tongue weight range of 1,500-2,000 lbs which would work with the tongue weight you listed of 1,525 lbs. Keep in mind that any cargo weight behind the rear axle of the tow vehicle counts as additional tongue…

view full answer...

Answer 7

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 8

To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind…

view full answer...

Answer 9

The brackets of the Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW2000 that you referenced can clamp on to trailer frame widths of up to 2-1/2 inches. I attached a review video for more info as well.

view full answer...

Answer 10

We have three 15,000-lb Blue Ox SwayPro weight distribution systems. Part #BXW1500 has an adjustable shank that has an 8-inch maximum rise and 2-inch maximum drop. Part #BXW1506 includes a shank that has a 13-inch maximum rise and 7-inch maximum…

view full answer...

Answer 11

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Can I Swap Spring Bars on a Blue Ox Sway Pro System For Different Sized Trailers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching