Can the Bushing Inside the Convert-A-Ball Ball Mounts Be Replaced

Question

Question:

Do you offer a rebuild kit to replace the polyurethane bushings inside this hitch?

asked by: John

0

Expert Reply:

The bushing inside the Convert-A-Ball Ball Mounts like part # AMSC2 is not replaceable. Therefore, if the bushing is worn or damaged the entire ball mount will need to be replaced unfortunately.

expert reply by: Conner L

0

Answer 1

The Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 cannot be used with a shock absorbing ball mount like the Convert-A-Ball Ball Mount #AMSC2. It can also not recommend by Curt to be used with surge brake couplers. I recommend using a…

view full answer...

Answer 2

I may have an option for you but the Curt RockerBall Shock Absorbing 2" Hitch Ball part #C40047 is a 2" ball with a 1" diameter shank so this will not work for your ball mount with a 5/8" hole. If you would like to switch out your…

view full answer...

Answer 3

There is not a replacement ball mount available for the Convert-A-Ball Adjustable Cushioned Ball Mount, CAB-UM, but there is what I believe is a better solution to your dilemma. The Convert-A-Ball Interchangeable Ball Set, item #906B, would give you…

view full answer...

Answer 4

The Curt RockerBalls like the part #C40047 do not require the use of a Curt ball mount or trailer hitch. They can be used in essentially any brand of ball mount or hitch.

view full answer...

Answer 5

The Curt RockerBall Shock Absorbing part #C40047 only comes in a 2" ball at this time. You may consider using a ball mount like part #AMSC2HD that has a shock absorbing core with a 2-5/16" ball. The ball hole diameter is 1-1/4". If you…

view full answer...

Answer 6

The cushion inside of the Convert-A-Ball cushioned ball mount #AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it…

view full answer...

Answer 7

The Curt RockerBall Shock Absorbing 2" Hitch Ball part #C40047 will add 1-1/2" of height to the ball platform so you will then indeed need to get a ball mount that has more drop or can be adjusted to have more drop. I have attached a list…

view full answer...

Answer 8

Yes, you can use either piece of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount, #CAB-UM, in the rise of drop position to find the configuration that is best for you. I have included a link to a video review of this ball mount for you.

view full answer...

Answer 9

I personally spoke to Curt who informed me their Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 should not be used with the Convert-A-Ball Ball Mounts including #CAB-UM. For the best experience I recommend using a ball mount with the…

view full answer...

Answer 10

Most of the Convert-a-Ball cushioned ball mounts like #AMSC2 have around 5 inches between the hitch pin hole and the closest edge of the platform. From my research a Towtector system requires 1-1/2 inches of space to be installed. So it depends on…

view full answer...

Answer 11

Yes, the RockerBall and channel style ball mount you asked about are absolutely compatible: - Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 - Curt Channel Style Adjustable Ball Mount #C45901 The reason is, the ball mount accepts a hitch…

view full answer...

Answer 12

If the trailer has an A-frame tongue on it, you should be in good shape unless you need to make a very tight 90 degree turn. We offer several different ball mounts in extended lengths. The longest ball mounts typically have a lower weight capacity.…

view full answer...

Can the Bushing Inside the Convert-A-Ball Ball Mounts Be Replaced

Product Page this Question was Asked From

Continue Researching