How To Determine Which Bearing Kit Is Correct For 1984 EZ Loader M522000 Boat Trailer
Question:
Hi, Im looking for wheel bearings for a EZ Loader boat trailer. 1984 Vin Model M522000. This is a single axle, 5 bolt hub. I have called EZ Loader also emailed but no response. What Im finding are a couple of options maybe. the #84 Spindle kit or 1inch BT8, Item #BK1-100? I was hoping to have a replacement set in hand when I take apart as apposed to take apart then order parts and had garage tied up. Thanks for any help
asked by: Terry
Expert Reply:
I do have an option for you, but unfortunately we do not have a breakdown of the specific bearings your 1984 EZ Loader M522000 Boat Trailer uses.
To determine the correct bearing kit for your trailer you will need to remove one of your current hubs and look for the bearing numbers stamped in the face of both the inner and outer bearings as shown in the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the inner or outer bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.
If you can provide the above information I would be happy to confirm the correct bearing kit for your trailer.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: 68149
- Shop: Grease Seals 10-36 (pair)
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: dust cap
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
- Video: Choosing the Right Brake Controller
- Shop: Gooseneck Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Recommended Dexter Suspension Kit 7753400
- Search Results: equalizer