Replacement Brake Assemblies and Hubs to Replace 10 inch Warner Assemblies with 5 on 4.5 Pattern
Question:
My trailer has Warner 10 1/4 inch hubs with 2 inch brakes. What can I replace them with? The hub is 5 lug and I believe its 5 on 4 1/2.
asked by: Joe W
Expert Reply:
The closest standard size for a trailer hub to what you mentioned would be 10 inch by 2-1/4 inch which I wonder if that's what you meant to type. This is a very common size for the 3,500 lb trailer axle and for new assemblies the part # 23-468-469 would give you a set of self-adjusting assemblies that would work well.
Then for hubs the Dexter part # 84546UC3-EZ would fit this hub, a 3,500 lb axle, and has the 5 on 4-1/2 inch lug pattern as well.
I attached an install video link for this for you to check out as well.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: What Do Old Warner Trailer Brake Assemblies Look Like
- Q&A: 5,200 Lb Timbren Axle-Less System With Compatible Hub, Drum and Electric Brakes
- Q&A: Replacing Warner 12 Inch Electric Brakes & 6 Bolt Mounting Flange
- Q&A: Economical Option for Trailer Wheel With 5 on 5-1/2 Bolt Pattern and Trailer Tires
- Q&A: Replacement 12 Inch Brake Assemblies Compatible with Old Warner Trailer Hub/Drums
- Shop: Trailer Hitch
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Article: Trailer Wiring Diagrams
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Search Results: 44649
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Grease Seals 10-36 (pair)
- Search Results: 25580
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
- Search Results: 68149
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Video: B and W Hitch Ball - Trailer Hitch Ball - BWHB94005 Review
- Search Results: dust cap
- Shop: Suspension Enhancement
on Trailer Brakes
