What Do Old Warner Trailer Brake Assemblies Look Like
Question:
Can you tell me what brand of trailer brakes this is and where I can get replacements? They are 12inch and 2inch width. Thanks!
asked by: Jeff
Expert Reply:
Those are Warner trailer brakes. This style is not made anymore and replacement parts are hard to find. We have some parts for the larger Warner assemblies but NOT the 12 x 2 inch ones.
Most people end up replacing them. You will have to have standard brake mounting flanges welded to the axle, see link, if it doesn't have them already. You will also need to replace the hub and drum assemblies. For that I would need to know the inner and outer bearing numbers stamped into the sides of the bearings. I also need to know the wheel bolt pattern. I have linked a help article that explains measuring for bolt pattern.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Fifth Wheel Hitch
- Shop: Trailer Wiring
- Search Results: dust cap
- Search Results: e54sr
- Search Results: trss300
- Search Results: 14125a
- Search Results: spindle washer
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Shop: Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Search Results: apubr~1
- Search Results: ce11051
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Shop: Base Plate for Tow Bar
- Q&A: Tool for Adjusting Drum Brakes on Drop Axle
- Article: Trailer Tire Sizing
- Shop: Tonneau Cover
- Article: Determining Trailer Tongue Weight
- Q&A: Upgrading Toyota Tacoma from 4-way Flat to 7-way Round Trailer Connector
- Q&A: Black Slide Topper For 188 Inch, 159 Inch, and 74 Inch Flange to Flange Measurements
- Q&A: How to Determine if Wheels Can Withstand 110 psi Rating for New Tires
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Video: Review of Americana Trailer Tires and Wheels - Wheel Only - AM20028
- Video: Americana Tires and Wheels - Wheel Only - AM20026 Review
on Accessories and Parts
Gerald
6/8/2020
i have a 10''drum i need the breaks made by warner parts are hard to find best thing to do is replace whole axle because newer barrons wont fit old axle i tryed failed i can have breaks repaded for 80 bucks plus shipping drums are opsaleet