Troubleshooting 3rd Brake Light Malfunction With A Hopkins Custom Tail Light Wiring Kit On A Jeep
Question:
Hello, I recently purchased and installed the Hopkins wiring harness, but the 3rd brake light on our Jeep does not work any longer after I installed it. I can get it to work from one of the rear brake/turn signal wires, but it of course blinks when turn signal is on. What do I need to order and install in order to fix this? Thank you, Tim
asked by: Tim W
Expert Reply:
Since you're only having issues with your brake light after installing the kit it could be a lose connection of one of the pins so I would first start by checking the pins on on your Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Item # HM56200 for any defects and using some Dielectric Grease # 11755 to form a strong connection.
If this does not solve your problem then the converter box isn't correctly sending signals and will need to be replaced. Since you just purchased this you'll be able to reach out to the manufacturer, Hopkins Manufacturing, for a replacement.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Product Page this Question was Asked From
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Tow Bar Wiring
- Plugs into Vehicle Wiring
- Wiring Harness
- Custom
- Tail Light Mount
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Vehicle Tow Bar Brake System
- Q&A: Ignition Key Position When Flat Towing 2013 Jeep Wrangler Unlimited
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Video: Roadmaster Brake-Lite Relay Kit Installation - 2014 Jeep Wrangler Unlimited
- Video: Best 2014 Jeep Wrangler Unlimited Tow Bar Wiring Options
- Video: Hopkins Tail Light Wiring Kit Installation - 2014 Jeep Wrangler Unlimited
- Q&A: Trailer Turn Signals Both Blink at the Same Time When Right or Left Turn Signal is Turned On
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Is Hopkins Tow Bar Wiring Harness HM56200 Considered a 4 or 6 Diode System
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Article: How to Measure for Trailer Hitch Drop
- Shop: Vehicle Lights
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Both Turn Signals Blinking at the Same Time on Trailer Towed by 1999 Chevy Silverado
- Shop: Replacement LED Monitor Light for Demco Air Force One and Stay-IN-Play Duo Braking Systems
- Q&A: Recommended Wiring to Flat Tow a 2014 Jeep Wrangler 2-Door with 2005 Bounder
- Q&A: Troubleshooting Hopkins Tow Wiring on 2014 Jeep Wrangler Unlimited Cause Motorhome Light Malfunction
- Video: Review of Demco Tow Bar Wiring - Battery Charge Line Kit - DM66VR
- Video: Demco SBS Towed Vehicle Battery Charge Wire Kit Installation - 2019 Jeep Wrangler Unlimited
- Video: Demco SBS Towed Vehicle Battery Charge Wire Kit Review
- Shop: Vehicle Cargo Control
- Video: SMI Supplemental Braking System Replacement LED Monitor Light Review
- Shop: Bestop Custom Underseat Locking Storage Box for Jeep - Passenger Side
- Shop: Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Shop: Bestop Underseat Locking Storage Box for Jeep Wrangler JK and Wrangler Unlimited JK
- Search Results: hm56200
- Shop: Roof Rack
- Shop: Trailer Wiring