Recommended Hubs For 22-AXC1 1800 lb Axle
Question:
Looking for a pre-greased hub that will fit on my 22-AXC1 axle. Bolt pattern doesnt matter. According to the specs, the spindle is 1 1/16. Thanks!
asked by: Michael B
Expert Reply:
You have a galvanized 1200 lb axle that uses L44649 inner and outer bearings, typically used on PWC trailers, I'd go with # AKIHUB-545-2-LFEZ-2K which is pre greased and ready to install. The hub also includes the dust cap for E-Z lube or standard spindles as well as the lug nuts. The hub has a 5 on 4-1/2 inch bolt pattern which is very common. I'll link to an install video that you might find helpful..
Products Referenced in This Question
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: 4-Way Trailer Wiring Recommendation for 1993 Ford E-350 Van
- Article: Best Boat Trailer Jacks
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Q&A: Comparing Trailer Tire Sizes 16.5x6.5-8 and 165/65-8
- Article: Sidewinder with Rotating Turret for Short Bed Pickups