Is the Reese RP69FR Welded Together or Forged?
Question:
Is this shank forged or welded construction? I have another brand welded hitch shank that I am replacing and it has worn on the top where it sits in the receiver. I want to avoid a similar issue.
asked by: Ronald K
Expert Reply:
The Reese # RP69FR is a welded together part. If you prefer a forged style shank, I suggest the Pro Series # RP63971. This will be rated a little higher at 1,500 pounds, but I do need to say that it cannot be used in the rise position. That being said, it does have 4 3/4 inches of drop, so it nearly matches the # RP69FR.
Products Referenced in This Question
Pro Series Weight Distribution Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 4 Inch Drop
- Pro Series
more information >
Product Page this Question was Asked From
Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1200 lbs TW
- Fits 2 Inch Hitch
- Reese
more information >
Continue Researching
- Shop: Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Shop: Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Shop: Reese Weight Distribution System w Shank - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Q&A: Longer Drop Shank For Weight Distribution System To Gain an Additional 2" of Drop
- Q&A: Weight Distribution Shank Recommendation for a Pro Series System Where More Drop is Needed
- Q&A: Weight Distribution Shank Recommendation for 2-1/2 inch Hitch for Reese System
- Search Results: curt shank
- Search Results: receiver shank
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: Which Hitches are Made in the USA
- Q&A: Will a Curt Shank Work with a Reese Weight Distribution System
- Q&A: Will the Curt 2-1/2 Inch Weight Distribution Shank Work With 2 Inch Weight Distribution Head
- Search Results: fastway e2 shanks
- Search Results: reese shank
- Shop: Fifth Wheel Hitch
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Search Results: sway control ball mounts
- Q&A: How Much Drop Does the Reese 3357 Weight Distribution Shank Provide
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Most Popular Wheel Bearings
- Article: Which Sway Control Hitch is Right For Your Trailer?