Where Do the Frame Hanger Brackets for the Curt TruTrack Weight Distribution System Get Installed
Question:
How far down the frame from the center of the ball can you mount the hardware for the bars.
asked by: Ronald T
1
Helpful Expert Reply:
In regards to the Curt TruTrack Weight Distribution System part # C17500, the frame brackets will need to be mounted 4" in from the end of the spring bar. I don't have an exact measurement on the frame but if you take the length of the spring bars and subtract the recommended position then you can get an estimate of 31".
expert reply by:
Conner L
1
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: curt weight distribution hitch
- Shop: Brake Controller
- Shop: Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Q&A: Stamp On 2005 Ford F-150 Says 9,900 Lbs but How Much Weight Can I Tow
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle