Weight Distribution Shank for 2021 Chevy Silverado with Equal-i-zer Weight Distribution 2.5 Hitch

Question

Question:

I know it would be best to have measurements but since the supply of these shanks are hard to find can anyone tell me how much of a I will need for a 2021 chevy 3500 srw?

asked by: Kyle L

0

Expert Reply:

I don't know what camper you have, the trailer coupler height, or the hitch height of your truck. But the Equal-i-zer shank part # EQ90-02-4900 would be a great option that would cover what you have most likely as it can do a drop of up to 6 inches and a rise of up to 10 inches.

expert reply by: Jameson C

0

Answer 1

Thanks for all the detailed information! Given the taller height of your 2019 Chevy Silverado 2500, I recommend the 10" rise or 6" drop Equal-i-zer Weight Dist Shank item #EQ90-02-4900 you were looking at. I strongly agree with you not…

view full answer...

Answer 2

The Equal-i-zer Weight Dist Shank #EQ90-02-4900 would work well. It's not so tall that would it cause too much potential to drag. This has a distance of 4 inches from the center of the hitch pin hole to the nearest flange bracket.

view full answer...

Answer 3

All you need is to swap out the shank of your system with one that is compatible with a 2-1/2 inch sized hitch and you'd be set. The most popular option is the Equal-I-Zer part #EQ90-02-4900 which is compatible with basically all brands of weight…

view full answer...

Answer 4

I have a solution for you, but you can't use the Roadmaster #RM-058-4 to tow a trailer; this high/low adapter is only suited for flat towing where there is not any tongue weight. Instead you can use a hitch reducer like the Gen-Y Hitch Reducer…

view full answer...

Answer 5

The Equal-i-zer Shank part #EQ90-02-4900 would be your best option to give you the amount of drop you need to tow your trailer level. The Curt shank you have now part #C17131 can do up to 2 inches of drop but the Equal-i-zer can do up to 6 inches so…

view full answer...

Answer 6

Congrats on the new truck! Our highest capacity bumper hitch for a 2024 Chevy Silverado 2500 is the Curt Trailer Hitch item #C96CR. This hitch is custom fit and bolts to your Silverado with included hardware. You will need to remove the factory hitch…

view full answer...

Answer 7

For the Equal-i-zer Weight Distribution Shank #EQ90-02-4900 the distance from the top surface of the shank down to the center of the bottom hole is 9-3/4-inches. I verified this measurement with my contact at Equal-i-zer and it is shown on the linked…

view full answer...

Answer 8

You can use the Equal-i-zer Shank part #EQ90-02-4900 with your Husky Centerline system to convert it to a 2-1/2 inch hitch. All you'd need is this shank and you'd be set.

view full answer...

Answer 9

The Equal-i-zer Weight Dist Shank part #EQ90-02-4900 will work just fine with a Fastway e2 Weight Distribution System and it has a 2-1/2" shank so as long as the drop of 6" is enough this will be the perfect option.

view full answer...

Answer 10

Yes, a shank like the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch #EQ90-02-4900 could work for your Reese system but be sure you are using a shank that matches or exceeds the capacity of your Reese system as well as provides enough rise or drop…

view full answer...

Answer 11

I've linked our selection of weight distribution shanks for 2-1/2 inch hitch receivers. Most shanks are universal and will work with other brands of systems. As long as the holes are 3/4 inch in diameter and are spaced 1-1/4 inches apart…

view full answer...

Answer 12

The Equal-i-zer Weight Distribution Shank #EQ90-02-4900 features a maximum drop of 6 inches so it should work perfectly to keep everything level with your new Ram. The 2-1/2 inch shank is indeed compatible with your existing Equal-i-zer system and…

view full answer...

Weight Distribution Shank for 2021 Chevy Silverado with Equal-i-zer Weight Distribution 2.5 Hitch

Product Page this Question was Asked From

Continue Researching