What Dimensions Are Brake Mounting Flanges for 10 Inch Brake Assemblies
Question:
My pattern on my 2015 camper with seft adjusting dexter brakes that bolts to axle measures 27/8 inch accross the top but the drawing I seen show 4 inch from top right to bottom left. mine measures 41/4 inch from center of top right to center of bottom left.
asked by: BOYET T
Expert Reply:
I recommend that you perform any measurements with a digital calipers; I'm fairly sure that this might be the reason for the discrepancy in measurements. Brake mounting flanges are a standard size and if you've got Dexter self-adjusting brakes on your trailer those would use a standard 4 bolt mounting flange like the ones found on the Dexter Nev-R-Adjust # 23-468-469 (both driver and passenger side assemblies). I've also linked a photo that shows the standard dimensions of a 4-bolt brake mounting flange.
These brake assemblies do not come with mounting hardware, so you may also need # BRKH10B.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Are All Electric Trailer Brakes Self-Adjusting
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Fuse Locations for Trailer Turn Signals on 2015 Ford F-250
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Are Differences Between Bias (D) And Radial (R) Tires
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Nev-R-Adjust Trailer Brakes are Not Locking Up After Re-packing Bearings
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Article: Trailer Wiring Diagrams