Does Draw-Tite Front Mount Hitch Fit 2021 Ford F-350 Super Duty 4x4

Question

Question:

draw tight front hitch receiver. will your hitch fit my 2021 f350 4x4 ??

asked by: Mike B

0

Expert Reply:

Yes it will! I verified with Draw-Tite front mounted hitch will fit your 2021 Ford F-350 4x4; the correct fit is the following part:

- Draw-Tite Front Mount Trailer Hitch Receiver # 65076

I have added a link below to the installation instructions for you to check out as well if you'd like to take a look.

expert reply by: Kyle S

0

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver item #65076 is a confirmed fit for your 2021 Ford F-350 Super Duty Dually. This also fits the F-350's with diesel engines. I have linked an installation video.

view full answer...

Answer 2

I contacted EcoHitch about the EcoHitch Hidden Front Mount Trailer Hitch Receiver part #306-X7904 and it is indeed confirmed to fit your 2019 Ford F-350 with the diesel engine. This hitch was redesigned to allow it to work with both gasoline and…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...