Brake Controller and Wiring Adapter for 2013 Toyota Tundra
Question:
toyota 2013 tundra Is there a reason why I would want this pigtail instead of the OEM version in my glovebox?
asked by: NANCY R
Expert Reply:
Since you already have the factory wiring harness, you do not need the Tekonsha Custom Wiring adapter # 3040-p for your 2013 Toyota Tundra. The factory harness functions should be labeled, you cannot go by wire color since there is no standard for wire coloring. From what I have found, the factory harness has an additional green wire you will not need that may be taped off.
I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR over the # RED44FR unless you need the time-delayed functionality in addition to the proportional controller.
The brake controller wire functions are as follows:
Input Power (Black)
Ground (White)
Brake Output (Blue)
Brake Lights (Red)
I have attached a review of the controller as well as the instructions for your reference.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 2 Axles
- Indicator Lights
- Redarc
more information >
Product Page this Question was Asked From
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Article: Trailer Maintenance Schedule
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: Can Short Bed Trucks Tow Gooseneck Trailers
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Q&A: How is Lippert Spare Tire Winch LC159056 Raised and Lowered