Trailer Hitch that Fits 2020 Mini Cooper Convertible with Single Exhaust

Question

Question:

Hi, do you have a hitch that will fit a 2020 mini Cooper convertible base model three cylinder single exhaust? I can give you the Vin if needed.

asked by: John W

0

Expert Reply:

The EcoHitch part # 306-X7290 is a fit for your 2020 Mini Cooper Convertible with single exhaust. I would not need your VIN to verify this. I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I have a one lock security solution for you. I recommend the 2 Inch Hitch Receiver Lock with 8 Foot Cable, Item #HRLHPC2. This Master Lock will secure your trailer hitch receiver and cargo carrier with locking pin and clip. You can wrap the 8 foot…

view full answer...

Answer 2

Although nothing is completely theft-proof when placed in an open cargo carrier like part #C18110, you can take some measures to make it a lot tougher for thieves. If the cargo can be placed in one container or bag like the etrailer Cargo Bag, part…

view full answer...

Answer 3

The Curt trailer hitch #C11417 is actually NOT a fit for a 2015 Mini with a spare tire. Instead you would need the EcoHitch #306-X7290 which does fit a Mini with a spare tire. While we have not test fit this hitch I did add a photo from the…

view full answer...

Answer 4

The EcoHitch part #EH87FR only fits the S models of the 2017 Mini Cooper hardtop S Series vehicles and would not fit a base model. We don't have anything that calls out the Sport model as a fit.

view full answer...

Answer 5

If you have our cargo carrier #e98874 then use the threaded hitch pin lock #e99047. If you have another cargo carrier, get this non threaded locking hitch pin #e98881. I like these better because they are pick proof and better than cable locks in my…

view full answer...

Answer 6

While there isn't a locking pin for the lower portion of the EcoHitch Stealth Trailer Hitch Receiver #EH84GR the good news is this won't be a high-theft item at all for a few reasons. Most people would not assume that it comes off as it…

view full answer...

Answer 7

For a great locking hitch pin for the 22x59 Rola Cargo Tray #59502, I recommend the HitchMate #HE6001. This hitch pin fits the threading that comes on the shank of the Rola Cargo Tray.

view full answer...

Answer 8

If you meant to ask about how to securely lock the Rightline Cargo Bag #RL100S30 you were looking at to your vehicles roof, I have a solution for you. I recommend the Rightline cable lock #RL100640 for their cargo bags that has a retractable steel…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...