Does Curt Assure Trailer Brake Controller Work With 2019 Ram 1500 Classic

Question

Question:

I want to confirm this trailer brake controller is compatible with my 2019 Dodge Ram 1500 Classic. Curt Assure Trailer Brake Controller with Dynamic Screen - 1 to 4 Axles - Proportional part number: C49UR

asked by: Andrew R

0

Expert Reply:

So long as your 2019 Ram 1500 Classic does NOT have the factory brake controller, then yes, you can use the Curt brake controller, and you will also need the correct wiring harness, which I've listed below for you:

- Curt Assure Trailer Brake Controller with Dynamic Screen # C49UR

- Curt Custom Wiring Adapter for Trailer Brake Controllers # C51458

The Assure is a superb option for a brake controller because it not only gives your trailer smooth braking proportional to that of your truck, but it is really easy to use because of its large screen with clear text, compared to some controllers with no screen that just give you symbols that or have a small screen that you can barely see.

I've added a link below to a video review for you to check out as well if you'd like to take a look.

expert reply by: Kyle S

0

Answer 1

The fact that the Curt #C51170 has a direct connection to battery is not unique to the Curt Spectrum brake controller, they all install in that manner. This is purposely done as a safety measure, so the user can't forget to turn on the brake…

view full answer...

Answer 2

The Curt Assure is 100 percent compatible and will work with your 2019 Ram 2500. You only need the Plug-In Wiring Adapter and you're set. This is a great choice for a brake controller because it is simple to use, has a really nice, easy-to-read…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Does Curt Assure Trailer Brake Controller Work With 2019 Ram 1500 Classic

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching