Does the Curt C13900 Fit a 2019 Ford Escape SEL?

Question

Question:

asked by: Angela G

0

Expert Reply:

I spoke to Curt, and the multi fit # C13900 will fit your 2019 Ford Escape. However, this will require drilling and may or may not need trimming of a heat shield or fascia to fully install. That being said, we do also have customer fit options available.

The etrailer.com # e98866 will not require drilling for the install. I also included an install video we have of this hitch on a 2019 Escape for you to take a look at.

expert reply by: Lazer S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

To mount your Sears X-Cargo to your Ford Escape, you're just going to need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603.

view full answer...

Answer 3

The hands-free liftgate of your 2014 Ford Escape will still function with the etrailer.com hitch part #E98866 installed. You will have to kick your foot to either side of the hitch opening though.

view full answer...

Answer 4

The Curt #C13900 is width adjustable, determined by where the bolts are installed in the crossbar of the hitch. If the hitch is assembled in its narrowest orientation as explained on page 3 of the linked instructions, it'll fit on frames that…

view full answer...

Answer 5

The Curt hitch part #C13900 that you referenced is designed to fit frame widths that range from 31 to 41 inches in width based on the holes you use. Check out the picture I attached to see how the holes match up with frame widths as well.

view full answer...

Answer 6

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide, #13703. Is our only option for that width, rated at max TW of 350 lb. Anything for that span exceeding 350 lb. will probably need to be custom fabricated.

view full answer...

Answer 7

I believe I have a better solution, the Curt Hitch part #C13701 has a 500 lb capacity that will fit trailers that have frame members that are between 18 and 51 inches apart. Whether or not you could replace your current bumper with one rated for…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" #C13900 measures 4-3/8 inches from the frame mounting point to top of crossbar. It measures 6-7/8 inches from the frame to the bottom of the crossbar and top of the receiver…

view full answer...

Answer 9

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 10

According to the linked installation instructions the Curt Trailer Hitch Receiver - Multi Fit #C13900 is compatible with your 2005 Chevy Tahoe LT. You will have to drill out the holes marked A, C, and D on both sides for this application.

view full answer...

Does the Curt C13900 Fit a 2019 Ford Escape SEL?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching