Parts Needed To Flat Tow A 1999 Toyota 4Runner SR5
Question:
I have a stock 1999 4Runner SR5 that Im going to set up as my Toad Vehicle, and Im confused with all the current options available. Im pulling this behind a F350 Dually, with the Superhitch/Supertruss I purchased from you a couple years back. I currently have a drive line disconnect being built so that parts taken care of. I want to put a Shrockworks bumper on the unit and add a 2inch of lift. Ive contacted Shrockworks, and Im out 4+ months on the bumper so thats going to have to wait as I need to pull this vehicle sooner. Im going to keep the vehicle stock for now, and until I can afford the upgrades. Sounds like I can use the Roadmaster 035-1 adapters on the bumper once its installed, but want to make sure I get the correct stuff to pull it now and then. My goal is to purchase all the towing items now, and limit whatever items wont be needed once the bumper is purchased down the road. Ive been looking at the Roadmaster Sterling or Blackhawk model tow bars for starters. Figuring at least 7500 lbs of towing capacity for the 4Runner and loaded gear. Will these work with the bumper, and in the interim before I get the bumper using included or optional base plates adapters? Is one model or the other a better choice, or is there an even better choice? Totally not sure about the braking system option that would be best. I like the Stay-in-play option if my year vehicle has a vacuum booster which I believe it does. Going to check today. Not real sure on the best wiring option either at this point. The more plug and play the better. If any of you can help me decide what the best options might be for my described application it will be greatly appreciated! Thanks,
asked by: Glenn S
Helpful Expert Reply:
Sounds like you are putting together a fun vehicle. I recommend checking the GVW of your SupperTruss hitch to make sure it is capable of handling the weight of the 4Runner. If it is capable of towing your 1999 Toyota 4Runner I recommend the following items:
Item # 1148-3 is a simple bolt on base plate that can be removed when your new bumper is added. This base plate works with 2wd and 4wd models. The cross bar brackets can be removed when not in use.
Item # RM-576 is the Sterling all terrain tow bar which has an 8,000lb tow capacity so it should be more than enough for your 4Runner even after it has been lifted and the extra weight has been added. This is a non binding tow bar. It comes with the cross bar which attaches to the brackets on the base plate. Each arm has channels that allow you to run your umbilical cord and safety cables through to keep them off the ground. Safety cables are included with the tow bar.
Item # RM-035-1 are the D-Ring adapters that are compatible with the Sterling Tow bar. You would simply remove the bracket at the end of each arm on the tow bar and bolt these in place. These fit 1" thick shackle mounts. If your new bumper has 3/4" shackle mounts then you would want to go with Item # RM-035. I would make sure that the bumper you are going to be adding is capable of flat towing a vehicle. Not all after market bumpers with shackles have been tested and approved for flat towing.
Item # RM-152-98146-7 is diode wiring. This kit is not difficult to install and once it is installed you don't have to do anything accept plug the umbilical in between the two vehicles when your ready to tow. The kit comes with everything needed including the umbilical that works with the Sterling tow bar channels. The diodes connect to factory wiring behind each taillight and protect the factory wiring if there is ever a short somewhere in the wiring.
Item # DM86VR which is the stay-n-play. This is a more permanent instillation. It is a proportional system that comes with the coach link monitor so you know when the brakes are being applied in the towed vehicle.
The only thing that would need to be changed when you add your new bumper is the tow bar end brackets to the D-link adapters and remove the baseplate.
Products Referenced in This Question
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Sterling All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 8,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Aluminum
- 8000 lbs
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: Blue Ox Tow Bar Adapter Bracket for Roadmaster Standard and Crossbar-Style Base Plates
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Shop: Vehicle Tow Bar Brake System
- Shop: Nerf Bars - Running Boards
- Shop: Blue Ox Avail Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs
- Shop: Roadmaster Base Plate Adapter Brackets for Blue Ox RV-Mounted Tow Bars
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Search Results: blue ox safety cables
- Search Results: blue ox to roadmaster adapter
- Search Results: blue ox tow bar
- Search Results: tow lights
- Search Results: brakebuddy
- Shop: Roadmaster Tow Bar Cover
- Shop: Roadmaster BlackHawk 2 All-Terrain Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs
- Search Results: blackhawk 2 tow bar
- Search Results: roadmaster
- Shop: Vehicle Tow Bar Wiring
- Shop: Off Road Lights
- Shop: Grille Guard
- Q&A: Can 50 Amp RV Connect to 30 Amp Power Source
- Q&A: Parts Needed to Flat Tow 2020 Ram 2500 Behind Motorhome
- Shop: Suspension Enhancement
- Q&A: Roadmaster Base Plate Kit for 1999 Toyota 4Runner
- Article: Trailer Wiring Diagrams
- Video: Blue Ox Patriot Portable Braking System Installation - 2022 Ford F-150
- Video: Brake Buddy Classic 3 Portable Supplemental Braking System Installation - 2009 Jeep Wrangler Unlimit
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: How to Choose the Right Trailer Hitch Class
- Article: Roadmaster Vehicle Specific Base Plates