Where Are RV Scissor Jacks Made

Question

Question:

Are these made in the US or in China?

asked by: Kevin J

0

Expert Reply:

The RV scissor jacks are all made overseas including the Ultra-Fab Ultra Scissor Jack part # UF48-979032. There are no USA made alternatives I am aware of. There really isn't another option unfortunately.

expert reply by: Conner L

0

Answer 1

I checked with Dexter, manufacturer of many trailer parts, and according to them there should be at least 1 inch of space between the tires when under load. So once your trailer is loaded and ready to tow, if you have more than 1 inch of space…

view full answer...

Answer 2

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 3

Yes, the Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are definitely an upgrade over standard trailer stabilizers. The drop down feature makes it a lot quicker to get the jacks up and tucked out of the way so they don't catch when the…

view full answer...

Answer 4

I have a solution for you because as you know what you have now cannot charge Lithium batteries. You will need the Progressive Dynamics #PD4135K which is designed to replace your WF-8735P and is compatible with Lithium batteries. When this is…

view full answer...

Answer 5

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack #LC298707.

view full answer...

Answer 6

If your switch is illuminated then I do believe that 3rd terminal is for the backlight. For a replacement I recommend checking out the Single Rocker Switch - 12V - On/Off - SPST - Black Plate with Red Illuminated Switch #37212525. Attached is a…

view full answer...

Answer 7

For a replacement you need the Titan Zinc-Plated Brake Actuator #T2477600. This is the Titan Model 10 which is the same as the Dexter DX12.5 you currently have on your boat trailer.

view full answer...

Answer 8

If you can tell me the mounting hole spacing of the old scissor jack I can determine if any of the models we have will fit. For example on jack #UF48-979032 there are a total of 8 mounting holes. Take a look at the picture I have included that shows…

view full answer...

Answer 9

Using a wheel and tire combination like the Kenda Karrier ST235/80R16 Radial Trailer Tire w/ 16" black Mod Wheel - 6 on 5-1/2 - Load Range E #AM34834 on a tandem axle trailer would give you just over 7000 lbs per axle capacity at your tires.…

view full answer...

Answer 10

Yes, both special trailer (ST) and light truck (LT) tires can be used on a 5th wheel trailer. They are actually the only two types of tires rated for this use. The reason for this is that tires on a trailer will be subjected to much harsher…

view full answer...

Answer 11

Yes you can go with a 10 Ply Load Range E tire for your trailer in the size of 225/75-15. For that we have the part #TR225LRE which has a weight capacity of 2,830-lb max load at 80 psi. What I also really like about this tire is that it has a higher…

view full answer...

Where Are RV Scissor Jacks Made

Product Page this Question was Asked From

Continue Researching