Recommended 7-way Connector For 2018 Subaru Outback Wagon
Question:
ok. new to popups. have 2018 outback. have 4-pin would like to change it to a 7-pin to charge trailer battery while traveling.
asked by: Steven T
Expert Reply:
Since you already have a 4-way connector like the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 installed in your 2018 Subaru Outback Wagon you will need to add the # ETBC7 which will plug into your 4-way connector and just require a few more connections.
The wiring connections are as follows:
Black wire to positive terminal of vehicle battery with included 40 amp circuit breaker (This is the 12v power circuit you need)
White wire grounded to frame
Blue wire to trailer brake controller (If your trailer does not have trailer brakes just tape the wire up out of the way)
You will also want the no-drill mounting bracket # C57202 to mount the 7-way to your trailer hitch receiver.
If your trailer does have trailer brakes I recommend using the Tekonsha Prodigy P3 # 90195 as it is an extremely reliable trailer brake controller with great features like an easy to read LCD screen, and built in diagnostics that are easy to read and understand.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Firestone Fuse Circuit Tap Kit Installation
- Search Results: fuse tap
- Search Results: circuit breaker
- Shop: Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Shop: Powered Converter Wiring Kit
- Shop: Pollak Circuit Breaker - Cycling/Automatic Reset - 30 Amp - Straight Mount Bracket
- Shop: Firestone Fuse Circuit Tap Kit
- Shop: ATO/ATC Dual Fuse Tap - 10 Amp Main - 5 Amp Added
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: ATM Low Profile Dual Fuse Tap - 10 Amp Main - 5 Amp Added
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 44649
- Search Results: 68149
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Grease Seal to Replace 127194TB
- Article: Trailer Maintenance Schedule
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Shop: Brake Controller
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Search Results: dust cap
- Search Results: 25580
- Video: Review of Progressive Dynamics RV Inverters - 1,000 Watts Pure Sine Wave Inverter - PD34FR
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch