Grease Seals for 2018 Dutchmen Kodiak Ultra Light Travel Trailer
Question:
What is the best way for me to identify what type of seals I need for my 2018 Duchman Kodiak Ultra Lite Travel Trailer. I know my axels are rated for 3500lbs. Im planning to repack the bearings. Thank you
asked by: Ake F
Expert Reply:
The Grease Seals # RG06-050 are the ones most likely to fit your 2018 Dutchmen Kodiak Travel Trailer.
You can confirm this by removing the hubs ahead of time(This is recommended so that you can inspect the bearings to see if you will require those as well). You will generally be able to find the measurement stamped into the seal. If you are unable to read the measurement you can see the article linked below on how to measure for that seal as well as the bearings and races.
When you go to put them back together you can install a set of Bearing Buddys # BB1980A-SS. This will make greasing your bearings a simple job that can be done regularly.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Direct Replacement for Carrier Air V RV Air Conditioner
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: trailer tires and wheels
- Search Results: tires
- Search Results: tires and rims
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Shop: Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs
- Shop: Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Shop: Trailer Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
- Shop: Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: Gas Shock - 40 lb Force - 15" Extended, 8.91" Compressed - Black Nitride
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: RV Jack Pads
- Shop: Blind Spot Detection
- Shop: Trailer Hitch
- Shop: RV Camera
- Shop: RV Interior Lighting
- Q&A: Recommended Grease and Grease Gun To Use With Dexter EZ Lube Hubs On Travel Trailer Campers
- Q&A: Will the Trailer Valet XL Trailer Dolly have Traction and Not Sink in when Used on Grass
- Q&A: Will a Trailer Valet Work on Gravel and Wood Chips?
- Q&A: What Is the Capacity of Trailer Valet XL
- Shop: Towing Mirrors
- Video: Longview Custom Towing Mirrors Installation - 2013 Chevrolet Suburban
- Video: Ultra-Fab Power Twin 2 Electric Stabilizer Review
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams