bing tracking image
Q & A Icon

Parts Needed to Replace Wiring On Car Tow Dolly  

Question:

I have a car dolly that the wiring is bad. I would like to know if you had any products that will work with my car dolly. Thank you

0

Expert Reply:

The replacement needed will depend on which trailer connector your car dolly uses, a 4 pole or a 7-way.

For a 4-pole, a standard trailer wiring harness like # HM48240 would work well for you.

If the tow dolly has a 7-way connector on it with electric brakes, I'd go with something like # 277-000141 to provide the trailer connector and junction box. The junction box allows you a safe spot to make your connections that will keep moisture away from the wiring connections. You'd use a length of wire like # 10-1-1 to run your brake circuit from the junction box to the brake magnets and # SWC4332-1 (sold by the foot) 3-conductor wire for the lighting circuits.

I'll link you to a help article about trailer wiring that you'll likely find helpful.

expert reply by:
0
Mike L

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.