Recommended Hub Drum and Electric Trailer Brake Assemblies for 3500 lb Axle
Question:
Do you have a 10 brake kit for a 3500lbs axle that includes brakes, drums, bearings etc...? Thank you
asked by: Chad W
Expert Reply:
The hub/drums and the brake assemblies are sold separately, but the hub/drums do typically include the inner and outer bearings, the races, the grease seal, the dust cap and the lug nuts.
A 3500 lb axle will typically use the L68149 inner and L44649 outer wheel bearing along with the # 58846 seal which has a 1.719 inner and 2.565 outer diameter. If this is the case, and your existing hub has a 5 on 4-1/2 inch bolt pattern, I'd recommend the etrailer # AKHD-545-35-EZ-K 10" hub/drum for E-Z lube spindles or the
# 84546UC3 for standard spindles.
For brake assemblies, I'd recommend going with a self-adjusting brakes, like # AKEBRK-35-SA. After the initial adjustment or making several low-speed braking events, the brakes will self-adjust and will always provide optimal braking performance.
The installation hardware for the brake assemblies is sold separately. If you'd prefer not to reuse your existing brake mounting hardware, you can use the # BRKH10B hardware kit.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
- Q&A: Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17