Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger

Question

Question:

will the PD 9260C replace my WF8955AN with out modfieing

asked by: Andrew P

0

Expert Reply:

For most situations, yes. If you have a power converter/charger installed and want to replace a direct R&R in most cases it is a straight forward task. However, please keep in mind that direct replacement with minimal wiring modification required is heavily dependent on the OEM installation and, if any previous modifications have been made. I have attached a link to the installation instructions for your review.

I suggest adding the Converter Status Remote Pendant for Progressive Dynamics Inteli-Power PD9200 Series converters Item # PD92201.

expert reply by: Michael R

0

Answer 1

Hey Bobby, You will want to use either solid or stranded copper wire between 2 and 14AWG for the positive and negative connections to the battery. The gauge will depend on the length of your run from the Progressive Dynamics PD9200 Series Battery…

view full answer...

Answer 2

You will just need a 30 amp fuse for the Progressive Dynamics 9200 Inteli-Power Converter #PD9245C.

view full answer...

Answer 3

The fan on your Progressive Dynamics #PD9260C running more often than usual could mean a couple of things are going on here; and you're correct in thinking that most of them aren't a good sign. It sounds like you've cleaned out the vents…

view full answer...

Answer 4

In storage mode, the output voltage increases to 14.4v DC for approximately 15 minutes every 21 hours to help prevent sulfation of the battery plates. The converter output should be 13.6. When disconnected from the battery, or when the batteries are…

view full answer...

Answer 5

I do have a simple wiring diagram for the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps #PD9245C. Basically you just need to run the power wire from the converter directly to the DC distribution panel and…

view full answer...

Answer 6

I would be happy to help! The charge current coming from the alternator is not going through the converter portion of your your panel as a converter converts AC power from shore power or a generator to DC power for your batteries. Since the…

view full answer...

Answer 7

Yes the Progressive Dynamics Inteli-Power Converter part #PD9260C would do a really great job keeping the batteries of your Airstream charged. This is a smart charger that will analyze the battery's current condition and give it the best charge…

view full answer...

Answer 8

It can be difficult to recommend the perfect size converter for a trailer without knowing the true load. It is best practice to replace the converter with the same size that came from the trailer manufacturer. If you have increased the load as well…

view full answer...

Answer 9

The great thing about DC power sources is that you can run multiple power sources together without issue unlike AC power which requires transfer switches. So the converter part #PD9245C ran to your panel along with your solar panel controller would…

view full answer...

Answer 10

I reached out to my contact at Progressive Dynamics, and he confirmed that there is no factory reset setting button on the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C. However, he recommended that you unplug it…

view full answer...

Answer 11

I recommend using the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9245C to charge the batteries with your Progressive Dynamics Pure Sine Wave Inverter #PD64FR. There is a certain way that it will need to be wired in…

view full answer...

Answer 12

The only difference between the Progressive Dynamics Inteli-Power RV Converter and Battery Charger #PD9160A and the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C is the charging cycles. The #PD9160A only has one…

view full answer...