Front and Rear TorkLift Camper Tie-Downs for 2006 Dodge Ram 2500 4x4

Question

Question:

I see that these are the rear mounts but my vehicle is not listed here. I have a 2006 Dodge ram 2500 4 x 4. Also looking for front mounts mounts

asked by: Jeff

0

Expert Reply:

There are both front and rear tie-downs for your 2006 Dodge Ram 2500 4x4, though the correct ones are going to depend on your bed size as well as if you have running boards or a step that go all the way underneath the truck bed. I will list out the options for you.

6-1/2 Foot Bed WITHOUT Running Board or Step Underneath Truck Bed

- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2102
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109

6-1/2 Foot Bed WITH Running Board or Step Underneath Truck Bed

- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD4102
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500

8 Foot Bed WITHOUT Running Board or Step Underneath Truck Bed

- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2101
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109

8 Foot Bed WITH Running Board or Step Underneath Truck Bed

- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD4101
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109

You will also need turnbuckles, and the best option that will work with the TorkLift frame-mounted tie-downs are the TorkLift Locking FastGun Turnbuckles because they offer the most security, and are by far the easiest turnbuckles to use.

They even come in your choice of gray or black: TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Gray # TLS9522-2-LK or Black # TLS9529-2-LK.

I have added some links below to video reviews for you to check out as well if you'd like.

expert reply by: Kyle S

0

Answer 1

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 2

I spoke with my contact at TorkLift who said that if you have the rear Tie-Downs #TLR3500 then you could potentially use the tie-downs if the aftermarket trailer hitch has room for the 4" x 4" footprint on the side plate for the…

view full answer...

Answer 3

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 4

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Hello Cory. I can definitely point you in the right direction, but there is not a B&W Companion option that will fit into a round gooseneck ball hole. As you said, the B&W Companion hitch is only compatible with the B&W Turnoverball…

view full answer...

Answer 8

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 9

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 10

The best way to determine the weight capacity of your leaf springs would be to check the weight rating of the axle on your trailer. The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be…

view full answer...

Answer 11

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Answer 12

Your slide-in truck camper does not have electric brakes so the blue brake circuit wire from its 7-way connector is not used. All other lighting functions as well as 12V auxiliary power will be maintained on the other circuits. Please refer to the…

view full answer...

Front and Rear TorkLift Camper Tie-Downs for 2006 Dodge Ram 2500 4x4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching