How To Keep Hitch Ball From Spinning When Torqueing Nut
Question:
Is there an attachment or accessory that can be used to keep the ball still while tightening the nut? I have the big Reese wrench for the nut but I need something that can slip on for the ball to stay still.
asked by: Robert S
Expert Reply:
Depending on which hitch ball you have it may have wrench flats on it like the 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs # 63845. If your hitch ball does have the wrench flats on the base of the ball you will need to use a large open end wrench to hold the hitch ball while torqueing the nut to the manufacturers specifications. When doing this it is easiest to install the ball mount side ways in the trailer hitch receiver since torqueing the nut when it is vertical is much easier than when it is horizontal.
If your hitch ball does not have the two flat areas on the base of the hitch ball we have used a bench vise to hold the hitch ball while torqueing the nut, and is really the best way. If you do not have a bench vise using a friends would be the best option.
Product Page this Question was Asked From
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Heavy Duty Forged Ball Mount for 2" Hitch - 2-5/16" Ball - 6" Drop - 15,000 lbs
- Q&A: Is Nut and Washer of Curt Hitch Ball C49FR Stainless Steel
- Video: Brophy Hitch Ball - Trailer Hitch Ball - SC30-C Review
- Shop: Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: 7" Long White/ 11" Long Red Conspicuity Reflective Tape - (8) 18" Strips
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Stainless Steel - 15K
- Shop: etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Video: Curt LED 4-Way Flat Connector Vehicle End Tester Review
- Video: Curt Ball Mounts - Fixed Ball Mount - C45341 Review
- Q&A: Can Hitch or Ball Mount Be Drilled for Additional Hitch Pin Hole
- Search Results: hitch balls
- Q&A: Installation and Torque of 1-1/4 Inch Shank Hitch Ball onto Ball Mount
- Search Results: hitch ball tightening tool
- Q&A: Does a Trailer have to be towed Level or Can it be Off Up or Down
- Q&A: What Size Wrench is Needed for a 2" Hitch Ball with 1 Inch Diameter Shank
- Video: etrailer Class III Trailer Hitch Installation - 2022 Hyundai Santa Fe
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2022 Hyundai Santa Fe
- Search Results: 2 5 16 ball 1 inch shank
- Video: Optronics Red and White Conspicuity Reflective Tape Review RE18T
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Picking Out Hitch Ball for Snow Bear Utility Trailer
- Q&A: What Grade Stainless Steel is Used on the Curt 2-5/16" Hitch Ball # C49FR?
- Video: Curt Ball Mounts - Fixed Ball Mount - C45332 Review
- Shop: Roof Rack