Ultimate Trailer Jack For 2018 Keystone Bullet Crossfire 2200BH Travel Trailer
Question:
Hello, I am trying to find a suitable manual tongue-jack for my 2018 Keystone Bullet Crossfire 2200BH travel trailer. I believe that the following product you offer would work, could anyone there help confirm? Item # 322-RDJ-2K Thank you!
asked by: Matthew B
Expert Reply:
To make sure that the Ultimate Trailer Jack # 322-RDJ-2K will fit your 2018 Keystone Bullet Crossfire 2200BH travel trailer you'll need to take some measurements. Make sure that the opening of your trailer coupler is at least 2-1/4 inches in diameter so the outer tube can slide in. The mounting holes are oval but from the center of each to the other it is 3 inches apart. Since they are oval there is a bit of wiggle room to line up with your coupler. The side of the three sided mounting plate that will be facing your trailer is 4-7/8 inches apart and the other two are 4-5/8 inches.
To help the inner tube of the jack from getting scuffed up I recommend getting the # JF-101BK and for moving it's best to have a wheel attachment # JC-102 but by using the caster, you will lower it's capacity to 1,200 lbs.
I've included a video for you to watch to learn a bit more about the jack!
Products Referenced in This Question
Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- etrailer
more information >
Footplate for 2-1/4" Round Tube, A-Frame Jacks - 2,000 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Foot
- 2-1/4 Inch Diameter Tubing
- etrailer
more information >
Product Page this Question was Asked From
Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 28 Inch Lift
- Bolt-On
- Weld-On
- With Rectangle Foot
- Ultimate Jack
more information >
Continue Researching
- Q&A: Replacement Multi-Function LED Trailer Light for Glo-Brite 9852-88
- Article: Trailer Wiring Diagrams
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How To Stop A-Frame Jack From Scrapping Ground While Going Over Bumps
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Low Profile Trailer Jack Recommendation for Better Tailgate Clearance
- Q&A: Hitch Extender For 2-1/2 Inch Hitch For Weight Distribution
- Q&A: Lowest-Profile A-Frame Trailer Jack For Tailgate Clearance
- Q&A: Wheel Caster to be Used with Ultimate Trailer Jack
- Article: 2023 Best Gifts for Haulers & Towers
- Article: Trailer Maintenance Schedule
- Article: 2023 Holiday Must Haves