Parts Needed to Complete Towing Package on 2020 Land Rover Defender D110 with Factory Towing
Question:
I would actually like a weight distribution hitch for this trailer. What do you recommend?
asked by: Susan D
Expert Reply:
Unfortunately we do not have towing components like a hitch or wiring that have been confirmed to fit on the 2020 Land Rover Defender yet, but if your vehicle came with the towing package included you should already have a hitch and wiring present though. If you actually just need a ball mount and hitch ball that fit into the receiver, then it looks like the D110 comes with a 2" receiver.
For that I recommend starting with something like the Curt # C45230, which can be used for trailers that require either a 2-3/8" rise or 3-5/8" drop. This ball mount has a 1" diameter ball mount hole and it appears that the 2019 Airstream Globetrotter 27FB uses a 2-5/16" coupler, so for a hitch ball you'll want the 2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs # 63847. You'll also need a hitch pin and clip which is available with part # C21500. If you'd like to secure the ball mount to the vehicle I recommend using the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome # e98880 instead of the # C21500.
I've linked some short review videos of these parts for you to check out.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Curt Dual Length Ball Mount for 2" Hitches - 2-3/8" Rise, 3-5/8" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: LED Trailer Taillight Recommendation for a 3110 Feather Lite Car Trailer
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Automatic Transfer Switch For 30 Amp Service
- Article: Will Flat Towing Blow Up Your Transmission?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What is 22 mm Size of Wheelmaster Lug Nut # WM9062 Refer To
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2023 Holiday Must Haves
- Article: How to Measure for Trailer Hitch Drop
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
Susan
1/27/2021
I would actually like a weight distribution hitch for this trailer. What do you recommend?