Mounting Hole Spacing on Erickson Horseshoe Rope Cleats, Part # EM09090
Question:
I contacted your ware house about the horseshoe cleats you have advertised. she informed me that the meassurement straight across the bottom holes were 2inch center to center. But your web page says 2 5/16inch center to center. ineed one 2 5/16 center to center. if you have one that matches what i am looking for i would love to buy several of them. the old one that i need to match up to is the same distance from hole to hole all the way around. i thank you very much and look forward to hearing from you
asked by: Brendon M
Expert Reply:
The Erickson Horseshoe Rope Cleats (2-Pack), part # EM09090, have three mounting holes in each and include Phillips-head mounting screws.
I pulled a sample from our warehouse to take precise measurements of the mounting holes.
Please refer to the attached photo. The two mounting holes on the bottom of the horseshoe are spaced 1-7/8 inches apart, measured center of hole to center of hole. The distance between either of these bottom holes and the middle/top hole is 2-3/16 inches.
My contact at Erickson confirms this is the only product of its type that they offer. We do have boating-type cleats but nothing similar to this item with the specific mounting hole spacing you require. I have included links to two other tie-down products in case these might work for you. These are the Brophy Trailer D-Ring Bolt-On Tie Down, part # SR15-C; and the Recessed Trailer D-Ring Tie Down, part # RR5K.
Products Referenced in This Question
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Product Page this Question was Asked From
Erickson Horseshoe Rope Cleats (2 Pack)
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- Rope Cleat
- Erickson
more information >
Continue Researching
- Shop: Erickson Horseshoe Rope Cleats (2 Pack)
- Shop: Tire Chains
- Shop: Titan Chain Snow Tire Chains - Ladder Pattern - V Bar Links - Manual Tensioning - 1 Pair
- Shop: Off Road Lights
- Video: Erickson Tie Down Anchors - Trailer Tie-Down Anchors - EM09090 Review
- Search Results: tie down anchor
- Shop: Titan Chain Multi-Arm Rubber Tire Chain Adjuster for Light Trucks - 1 Pair
- Shop: Go Power Portable Power Bank with Solar Panels
- Video: Titan Chain V-Bar Snow Tire Chains Review
- Video: Titan Chain Snow Tire Chains with Cams Review TC2809CAM
- Shop: Titan Chain Snow Tire Chains w Cams - Ladder Pattern - V Bar Links - Assisted Tensioning - 1 Pair
- Search Results: tie down bracket
- Search Results: tie down anchors
- Q&A: What are the Erickson Horseshoe Rope Cleats - 2 Pack, # EM09090, Made Of
- Q&A: Mounting Hole Specs For Erickson Horseshoe Rope Cleats # EM09090
- Q&A: What are the Dimensions of the Erickson Horseshoe Rope Cleats, # EM09090
- Q&A: Largest Rope Diameter That Could Be Used with Erickson Horseshoe Rope Cleat # EM09090
- Shop: Trailer Hitch
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: dust cap
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Video: Brophy Trailer D-RIng Tie Down Review SR15-C
- Search Results: 44649
- Video: Choosing the Right Brake Controller
on Tie Down Anchors
