RV Trailer Hitch Receiver for 68-1/2 Inch I-Beam Frame
Question:
1 The Curt 13704 specs say 22-66 inch wide yet I found several question answers that say 68.5 inch is OK? Why do they list 22-66? My I-beams are 68.5 inches on center so if I use the 2 inner flanges it would be less then 68.5 2 The I-beam flanges are 1 inch wide on each side of the i-beam. The attachment bolts as 5/8 inch which would only leave 3/16 inch on each side of attachment hole. Would that be structurally sound?
asked by: Jerry H
Expert Reply:
We do have an adjustable-width RV trailer hitch receiver that will work for your I-beams spaced 68-1/2 inches apart, though the 13704 you mentioned is only for frames up to 66 inches apart. In the past it was for slightly wider frames but the manufacturer updated the dimensions.
So because your I-beams are 68-1/2 inches apart, the correct hitch for your trailer is the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703.
This uses brackets that and 1/2 inch bolts to attach to your I-beam, as you can see in the cut outs I added, and that will absolutely be structurally sound; or if you choose you can also have the hitch welded on.
I have added links below to both the instructions and a video install for you to check out as well if you'd like of the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703.
Products Referenced in This Question
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Product Page this Question was Asked From
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide
- Shop: Stromberg Carlson Adjustable Accessory Hitch Receiver - 49-1/2" to 76-1/2" Wide - 2"
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Video: Review of Curt RV and Camper Hitch - Frame Mount Hitch - C13704
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Shop: Suspension Enhancement
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Search Results: 25580
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Shop: Brake Controller
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Search Results: 15123
- Video: etrailer Class III Trailer Hitch Installation - 2016 Jeep Cherokee
on Accessories and Parts
