E-Bike Rack Recommendation for Rear of Pop Up Camper

Question

Question:

I have a Infiniti QX56 and will be pulling a 2008 Jay Series 1007 pop up camper. What can I purchase from you to be able to haul my 2 ebikes. They are Aventon Pace 350 and weight approximately 48 lbs each.

asked by: Mary J

0

Expert Reply:

For an e-bike rack that has the weight capacity you need and could be used at the back of a popup camper the best option is Swagman E-Spec # S94FR which covers all of that really well.

I attached a review video for this rack for you to check out as well.

expert reply by: Jameson C

0

Answer 1

We offer a number of bumper mounted trailer hitches. The Curt RV Bumper 2" Trailer Hitch Receiver, part #E-100, fits a 4" X 4" bumper. There is also a 4" X 2" version, part #C19101. Each of these trailer hitches have a…

view full answer...

Answer 2

The best option for a bike rack that can be used with your 2016 Ford F-150 and a motorhome is going to be the Swagman E-Spec Bike Rack for 2 Electric Bikes item #S94FR. This heavy duty bike rack can carry two e-bikes weighing up to 70 lbs each. It is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andy, the Swagman E-Spec part #S94FR would be able to accommodate a bike wheelbase that is 48.8 inches so it would work for you.

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Is the battery of the breakaway kit charged? Does your tow vehicle have a brake controller installed?

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Hollywood Racks RV Rider Bike Rack #HLY64FR is capable of supporting 2 bikes up to 80lbs each. It is both compatible with the 2" hitch on the back of your 5th wheel and will fit tires up to 5" wide.

view full answer...

Answer 11

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...

Answer 12

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

E-Bike Rack Recommendation for Rear of Pop Up Camper

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching