Electric Brakes for 6,000 lb Axle With 16 Inch Wheels
Question:
5th wheel brakes. I own a 2007 region FA3005 fifth wheel toy hauler. If I’m not mistaken it has 6000 pound axles with 16 inch wheels what size brakes would I need?
asked by: Lloyd
Expert Reply:
We do have electric brakes that are for a 6,000 lb axle and will work with 16 inch wheels. The only thing you need to make sure is that you have a 5-bolt brake mounting flange like part # 4-44-1, and that your hub's drum is 12 inches in diameter.
Assuming you do have those things, you can choose from either manual-adjust brakes (which require Brake Adjustment Spoon # W80630) or self-adjusting brakes for the most convenience. The brakes that fit are the following:
- Manual-Adjust: Electric Trailer Brake Kit - 5,200 lbs to 7,000 lbs # AKEBRK-6
- Self-Adjust: Dexter Nev-R-Adjust Electric Trailer Brake Kit - 6,000 lbs # 23-458-459
Both brake assemblies will also require the mounting hardware, which is the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
Then to connect the wires I recommend using the Deka Heat Shrink Butt Connectors # DW05745-5.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Brake Adjustment Spoon for Drum Brakes
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- Adjuster
- Brake Adjuster Tool
- Performance Tool
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Article: What To Look For When Buying Ratchet Straps
- Q&A: What Type of Fluid to Use in Lippert Hydraulic Leveling Systems
- Q&A: Finding A Replacement Electric Winch For 2007 Rockwood Popup Camper
- Q&A: Do Trailer Tires and Wheels Need to be Balanced
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Charge a Dump Trailer Battery
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Maintenance Schedule
- Article: Roadmaster Vehicle Specific Base Plates
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps