Dimension of the Titan Brake Actuating Coupler

Question

Question:

Hello Im interesting in T4750820 Brake Actuator. Please can you specify weight and size for this item packed

asked by: Alexander B

0

Expert Reply:

The Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 12,500 lbs # T4750820 has a shipping weight of 51 lbs. I can't specify the size of the item packed as the shippers can utilized different size boxes as they see fit to protect the product.

expert reply by: Jason S

0

Answer 1

Sometimes dust and dirt can get down in the threads of the master cylinder cap and they can get stuck on there real good. Unfortunately there is not really a trick to getting it off, other than using force. A little WD40 may help but I would use that…

view full answer...

Answer 2

A trailer actuator-coupler with an electric reverse lockout feature, such as Titan #T4750820, allows you to reverse your trailer without having to get out of the vehicle to first engage a manual lockout lever. The internal solenoid in the actuator…

view full answer...

Answer 3

The replacement Titan actuator for your Model 10 with part number 3241639 is listed on our site as the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout #T4750620. My contact at Titan confirmed this.

view full answer...

Answer 4

On the reverse lockout solenoid on Titan coupler #T4750820, one wire will need to be grounded to the trailer frame. The other wire needs to connect to the reverse light circuit on the trailer side connector. When the vehicle is placed in reverse it…

view full answer...

Answer 5

We do have a solution for you. If you're wanting to get an electric lockout system you cannot convert the manual lockout #T63FR to electric. You will have to get the Electric version #T4750820 and install the whole assembly.

view full answer...

Answer 6

I had our warehouse measure the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 12,500 lbs #T4750820 you mentioned and it is 26-1/2" long, 5" deep not including the mounting bracket, 8" deep including…

view full answer...

Answer 7

Since the Titan Zinc-Plated Brake Actuator #T4750820 that you referenced has a weight capacity of 12,500 lbs and a tongue weight capacity of 1,250 lbs it will serve well as a replacement actuator for your application. The mounting holes are spaced…

view full answer...

Answer 8

The Fitting in the back of your actuator, #T4750820, will need to be removed to install the Solenoid Valve for Titan Brake Actuators, #T4748800. I have posted a photo showing this fitting. Once the fitting is removed you will install the solenoid…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Dimension of the Titan Brake Actuating Coupler

Product Page this Question was Asked From

Continue Researching