What Spindles are on Trailer Axle T20BTR-EZ-7258
Question:
Does the BT8 wheel hubs fit the 1 1/16 inch diameter spindles? Axle is T20BTR-EZ-7258
asked by: Jeff R
0
Expert Reply:
The trailer axle part # T20BTR-EZ-7258 that you referenced actually uses BTR spindles and not the lighter duty BT8. The BTR spindle has a diameter of 1.06 inch. For a idler hub that fits you could use the # AKIHUB-440-2-EZ-2K.
expert reply by:
Jameson C
0
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Locating Replacement Dexter P-15 Axle on Trailer
- Q&A: Recommended Trailer Axles and Suspension for BBQ-Smoker Trailer with Pit Weighing 3,000-3,500 lbs
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf Spring
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch for a 2024 Honda CR-V
- Q&A: Dexter P-15 SLR Axle SN D4484069 Weight Capacity and Replacement Axle
- Q&A: Are the Gooseneck Hitch Balls the Same for a GM and Ram Puck System
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule