How To Choose Between 5" or 7" B&W Tow & Stow 3-Ball Mount for Ground Clearance
Question:
I have a 2020 Ram 2500 Power Wagon. Im trying to decide between the triple ball with a 5 inch vs 7 inch . The truck comes with a 2 inch lift from the factory. My main concern is it hanging too low and dragging on some boat ramps. However, I also want to make sure I have enough options for future trailers. If Ive measured correctly the 5 inch should work for my current boat, which sits at 23 inches vs. the 25.5 inch height of hitch on truck.
asked by: Chris B
Expert Reply:
In regards to the B&W Tow & Stow 3-Ball Mount part # BWTS10048B for 5" or part # BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5" drop version and 10.5" for the 7" drop version. If you were towing with the hitch balls in the lowest position that would reduce ground clearance by another .5". This should then help with your decision.
I have attached a photo to clarify these on the 5" drop version.
Products Referenced in This Question
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 7 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- B and W
more information >
Product Page this Question was Asked From
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- B and W
more information >
Continue Researching
- Shop: B&W Tow & Stow 2-Ball Mount - 2.5" Hitch - 5" Drop/4.5" Rise - 18K - Black
- Shop: B&W Tow & Stow 3-Ball Mount - 2.5" Hitch - 7" Drop/7.5" Rise - 18K - Black
- Shop: B&W Tow & Stow 3-Ball Mount - 2-1/2" Hitch - 4-1/2" Drop/Rise - 18K - Black
- Search Results: b&w
- Q&A: How To Choose Between 5" and 7" Drop B&W Tow & Stow 2-Ball Mount for 2.5" Hitches
- Shop: Trailer Hitch Receiver Lock for 3" Hitches - Flush - 3-1/8" Span - Stainless Steel
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Zinc - Topwind - 10-3/4" Travel - 2K
- Shop: Bulldog Collar-Lok Coupler w/ High-Profile Latch - 2" Ball - 3-1/2" Round Tongue - 5,000 l
- Shop: Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 5-1/2" Drop, 4-1/2" Rise - 20K
- Shop: Trailer Hitch
- Q&A: Replacement Scissor Jacks Recommendation for an InTech Enclosed Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Shop: Tonneau Cover
- Q&A: Choosing Between Agricultural-Grade Hubs vs. Standard Trailer Hubs
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Trailer Coupler Recommendation for a Round 2 Inch Diameter Straight Tongue
- Search Results: andersen 3492
- Search Results: andersen
- Article: What Exactly is Tongue Weight?
- Search Results: military discount
- Shop: Tool Box
- Search Results: decked
- Shop: Suspension Enhancement
- Search Results: 7 pin trailer cable
- Shop: Gooseneck Hitch
- Search Results: locking hitch pin
- Shop: Fifth Wheel Hitch
- Video: Review of Ark Camper Jacks - Stabilizer Jack - ARK94FR
- Q&A: Dimensions of the B&W Tow and Stow 3-Ball Mount