Customers compare BWTS10043B to these similar products
Products Featured in this Video
Today we'll be taking a look at the B&W Tow and Stow 2 Ball Mounts for 2" Hitches available in a variety of different drops and rises, with a 7,500 or a 10,000 pound towing capacity. This tow and stow ball mount stows up and out of the way when not in use and is easily returned to its towing position by pulling these two clips here, removing the pins, as you can see it slides down the shank… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Determining how to get the correct rise or drop is actually pretty simple and only requires two measurements. If you get the largest rise and drop you could wind up with more ball mount than necessary. In order to choose the correct ball mount, there…
view full answer...From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball Mount #BWTS10040B measures 10". Then with the 2" hitch ball in the lowest position the 2-5/16" hitch ball will sit about 12"…
view full answer...This is a reason we measure and label our site all the same way rather than going off the description or title from our manufacturers. On the BulletProof Hitches 2-Ball Mount #BPH64FR it is capable of a 4" total drop or 4" total rise. The…
view full answer...The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise item #BWTS10033B is 6 1/2". I have attached a picture with the dimensions drawn on it.
view full answer...Yes, you can set the B&W Tow and Stow Ball Mount part #BWTS10033B to 0 rise if you align the adjustable portion of the ball mount with the shank in the drop position. There is not an offset in drop position it starts at 0 and the increments…
view full answer...The B&W Tow & Stow 2-Ball Mount #BWTS10037B that you referenced will hang down exactly 5-1/2 inches from the bottom of your hitch opening.
view full answer...Dexstar steel trailer wheel #AM20532 is rated for 2,830 pounds at 80 psi. It will fit on a hub with a 6 on 5-1/2 bolt pattern. This bolt pattern is typically found on 5,200 and 6,000 pound axles but in some cases can be found on 3,500, 2,200, and…
view full answer...The B and W Tow n Stow part #BW44FR does work with the GM Multi Pro Tailgate but it fits the 2 inch hitch size whereas your husband's 2022 GMC Sierra 2500 would have a 2-1/2 inch hitch size so the correct part number to get would be the part…
view full answer...The shank portion of the B&W Tow & Stow Pintle Hook/Hitch Ball #BWTS10056 cannot be used as a component of a weight distribution system. B&W designed this adjustable pintle/ball combo hitch to offer the flexibility to tow as both a pintle…
view full answer...Valley went out of business a few years ago, so their products are no longer available. I'd recommend the B&W Class V hitch, part #BWHDRH25230. The hitch is a three piece design, with the side plates and center section being individual…
view full answer...According to B&W, the #BWTS20067BMP cannot be used with a weight distribution setup. Even if it could, the hole spacing wouldn't match for you to attach your weight distribution system. You will have to stick with a weight distribution shank…
view full answer...Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…
view full answer...