Can SeaSucker Talon Bike Rack Hold a 4.5" Fat Bike Tire?

Question

Question:

Is the rear mount capable of mounting a 4.5 “ tire ?

asked by: Craig

0

Expert Reply:

Regarding the # 298-BT1004 Talon Rack SeaSucker reports, "The rear wheel cup has a 22" strap to secure any size back tire." I called my contact at SeaSucker and they confirmed the information about the 22" strap and that it indeed would have no issues holding your 4.5" tire.

expert reply by: Les D

0

Answer 1

Yes, the Kuat NV 2.0 2-Bike Platform Rack #NV22G will fit wheel sizes 25" - 29" with a maximum tire width of 4.8" I did contact Kuat directly today to confirm this for you. It has an included adapter and there is also a…

view full answer...

Answer 2

It sounds like you would like to use the SeaSucker Talon Roof Bike Rack #298-BT1004 on the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum #BAK448223. Since this cover has aluminum panels it will be sturdy enough to use the vacuum mount. The…

view full answer...

Answer 3

According to your owners manual, your 2012 Ford Focus should never tow a trailer and is not equipped to tow. Using a trailer hitch like #C11158 is ideally to be used for accessories like a bike rack. Your vehicle has a payload rating between 935…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Can SeaSucker Talon Bike Rack Hold a 4.5" Fat Bike Tire?

Product Page this Question was Asked From

Continue Researching