Do Ratcheting Winch Handles for Dutton-Lainson Brake Winches have a Forward, Neutral, and Reverse

Question

Question:

Does this handle and or the 70347 DLB Series similar product reverse directions? Is there a forward, neutral and reverse setting? Also, what bolt shaft diameter fits through the inner hole?

asked by: Spencer

0

Expert Reply:

I went out to the warehouse and pulled handle # DL70347. It can ratchet one way or the other but there is no neutral position unless you physically kept the switch on it from locking into either position. The handle threads onto a 1/2 inch coarse threaded shaft but it is specifically designed for Dutton-Lainson DLB series brake winches.

Handle # DL70346 functions the same way but fits B series Dutton-Lainson brake winches.

expert reply by: Michael H

0

Answer 1

We do sell the Dutton-Lainson Freewheel Brake Winch #DL15761. This winch combines the best of both worlds, allowing you to lift the latch so the gears can freespool or secure the handle with the latch to engage the brake. The ratcheting handle for…

view full answer...

Answer 2

Great question! I believe that you're wanting to extend that handle out horizontally so that you aren't having to 1 - get on your hands and knees while operating the winch, and 2 - having to keep removing and installing the handle because it…

view full answer...

Answer 3

Boat winches typically can easily handle a boat that is rated twice their capacity as long as it is being pulled onto a trailer with standard carpeted bunk boards. If you are using rollers it can handle more weight but if you are using wooden bunks…

view full answer...

Answer 4

The Ratcheting Replacement Handle #DL70346 referenced in your question is designed to replace the non-ratcheting handle on any Dutton-Lainson B-series brake winches, including those with 2,000 pound and higher capacities like #DL10786. This…

view full answer...

Answer 5

The only difference between the two is the diameter of the hub that the cable would wrap around. The hub of the #DL14958 is 3-1/8 inches while the hub of the #DL15850 is 2-1/2 inches. The #DL14958 can accommodate up to 40 feet of 5/16 inch cable,…

view full answer...

Answer 6

The B Series Brake Winch Ratcheting Replacement Handle by Dutton-Lainson part #DL70346 is designed to replace the regular non-ratcheting handle on all single speed Dutton-Lainson B Series brake winches. Therefore, this handle is compatible with a…

view full answer...

Answer 7

You would want a Worm Gear Winch like the part #DL10954 that can be used as a hoist. The Dutton-Lainson Heavy Duty Brake Winch #DL15850 that you referenced is not rated for lifting things off the ground. Dutton Lainson states that this winch is not…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Do Ratcheting Winch Handles for Dutton-Lainson Brake Winches have a Forward, Neutral, and Reverse

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching