PressurePro FX 4 TPMS for RVs and Trailers # 372FX4K be Used with Rubber Valve Stems

Question

Question:

PressurePro FX 4 TPMS for RVs and Trailers - Smartphone Display - 4 Waterproof Sensors Buying for an 29 foot enclosed trailer - 2 axle Do I need metal valve stems - read in reviews that manufacturer requires them. Thanks

asked by: Robert E

0

Expert Reply:

We've spoken with PressurePro in the past about what types of valve stems can be used with their kits like the part # 372FX4K that you mentioned and they told us that the only kind of valve stem that CAN'T be used is the longer style ones. So rubber valve stems would work great.

expert reply by: Jameson C

0

Answer 1

When it comes to installing a trailer brake controller on your 2016 Toyota Tacoma with the tow package, The Redarc Tow-Pro Liberty Brake Controller - Proportional #RED24FR will work for you. You will also need The Plug-and-Play Wiring Harness for…

view full answer...

Answer 2

I wouldn't recommend mounting the Erickson #EM77316 spare tire carrier on the door of an enclosed trailer. The carrier is meant to be installed inside an enclosed trailer, and is designed to hold the tire upright, not suspend it so the tire needs…

view full answer...

Answer 3

The Tuson Towable Tire Pressure Monitoring System #335TPMS4WIVS positions the tire sensors inside the tire so they will stay dry and can be used on your boat trailer. This system is capable of storing 3 different setups with up to 10 sensors per…

view full answer...

Answer 4

If you needed to view 14 total tires between your truck and trailer you certainly could with the part #372FX4K. This comes with 4 sensors and to add more you'd need the part #3722SEN which is a pair of sensors. You'd need to order a total…

view full answer...

Answer 5

The Dexter Trailer Hub Assembly you referenced, part #AKIHUB-440-2-1K is known as an idler hub. An idler is a hub that is no provisions for trailer brakes. It has no brake drum. Part #8-276-5 is an example of a hub/ drum that has a brake drum that…

view full answer...

Answer 6

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 7

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 8

The Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 uses frame brackets for installation, and those need to be positioned on the inside of an I-beam frame, as per the instructions (a copy of which I have linked for you). That is what will…

view full answer...

Answer 9

There is not a fuse we carry for the 8000 Series of Fan-Tastic vent. It does use a 4 amp slow blow fuse so to make fuse access simpler you can use In-Line Fuse Holder #C58470-1 and if you need to replace the bow-tie bracket, motor, and blade the…

view full answer...

Answer 10

view full answer...

Answer 11

You always need to keep your trailer tires filled to the max cold psi rating. If your current load range G tires have a 110 psi rating then that is what you need to keep them filled to. Tire blowouts are a result of damaging a tire (like hitting…

view full answer...

Answer 12

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

PressurePro FX 4 TPMS for RVs and Trailers # 372FX4K be Used with Rubber Valve Stems

Product Page this Question was Asked From

Continue Researching