Replacement Motor for Fan-Tastic Create-A-Breeze Fan

Question

Question:

Have a failing motor on a Fantastic Create A Breeze fan. Its in a 2006 Fleetwood Discovery V39. Looking for replacement kit. Dont need lid or other parts, just motor and probably fan. Thank you

asked by: Jim S

0

Expert Reply:

What you have is a model 8000 and we do have the correct replacement motor kit, which does come with the fan blade.

The part you need is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00.

expert reply by: Kyle S

0

click to enlarge

Answer 1

When installing the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 you can remove the fan housing if you like, and this will be easier if done from the top of the roof as opposed to inside the trailer. I have added…

view full answer...

Answer 2

From what our customers have said the Replacement Fan Motor Assembly Kit #FVK8017-00 is slightly off as far as the diameter of the fan but the mounting hole spacing is the same. You can double check what you have by taking a look at the measurements…

view full answer...

Answer 3

Although trailer manufacturers do not keep any type of database of every part used in every year, make and model of trailer from your description it does sound like you have the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV803350, which has a thermostat…

view full answer...

Answer 4

Most likely you need the part #FVK8017-00 which fits most of the Fan-Tastic roof vents, but we don't have just the motor available. Does this match what your motor looks like?

view full answer...

Answer 5

Yes it will; I verified for you the correct replacement fan motor is the assembly you asked about, which is the following part number: - Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00

view full answer...

Answer 6

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 has the same hole spacing as the fan on your 6500 model so it will work. The diameter of the fan is a different than the original but it is the correct replacement.…

view full answer...

Answer 7

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 is what you need. It will work with create a breeze and Fan-Tastic Fan models.

view full answer...

Answer 8

Yes, the Replacement Fan Motor Assembly Kit #FVK8017-00 is the correct motor replacement for your Fan-Tastic 4000BT roof vent.

view full answer...

Answer 9

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Replacement Motor for Fan-Tastic Create-A-Breeze Fan

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching