Will Curt Class I hitch C11525 Fit Hybrid Model of 2018 Honda Accord

Question

Question:

Hi, On theproduct page for the 2018 Honda Accord, it specifically lists on the page “ excluding Hybrid “ But i have hear others say it will fit. Kind of confusing... Does it fit the hybrid or not?

asked by: Sam

0

Expert Reply:

The Curt hitch # C11525 you'd looked at is not a fit for hybrid models of the Honda Accord and we do not currently have a hitch for the hybrid. Please let me know if a roof rack or a trunk mounted bike rack would meet your needs. We are here to help.

expert reply by: Mike L

0

Answer 1

The trailer hitch that I recommend for your 2022 Honda Accord is the Curt #C11525 because it has a thicker powder coat that will do a better job at resisting the elements than some of the other hitches on the market. This is a Class I hitch with a…

view full answer...

Answer 2

We do not currently, (April 2023) to fit a 2018 Honda Accord Hybrid EX. The Hybrid model was excluded from fit. We do have a trunk mounted bike rack or a roof rack available to carry cargo or bikes. Please let us know how we can help you meet your…

view full answer...

Answer 3

We do not currently (April 2023) have a hitch that will fit the 2022 Honda Accord Hybrid. We can offer a trunk mounted bike rack or a roof rack if that would help.

view full answer...

Answer 4

We do not currently have a trailer hitch to fit the Hybrid model of the 2018 Honda Accord. (April 2023) Please let us know if a trunk mounted bike rack or a roof rack would meet your needs.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 12

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Will Curt Class I hitch C11525 Fit Hybrid Model of 2018 Honda Accord

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching