Parts Needed to Install a Trailer Brake Controller on a 2000 Isuzu Trooper with 4-Way Connector
Question:
i have a 2000 isuzu tropper i am going to be purchasing a pop up camper that is going to have brakes. my question is how do i install a brake controller in the car will any brake controller work? or do i have to use a specicail one the vehicle does have a tailight converter in the back for the tailight thankyou
asked by: Jeff M
Expert Reply:
Since your 2000 Isuzu Trooper already has a 4-Way trailer connector (if it is different than a 4-Way let me know) so all you will need are 2 additional parts. First, you will need to add a 7-Way using # ETBC7. This kit also includes the wiring to wire in the brake controller.
The second part you will need is the brake controller itself. Brake controllers are not vehicle specific so you can use any one you choose. I recommend the Tekonsha P2, # 90885, because it is easy to set up and easy to use. I have linked isntructions for you.
I have also included some links that will show you how to install the ETBC7 kit.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Find COLD Side of Brake Light Switch for Hardwiring Brake Controller
- Q&A: Adding a Brake Controller to a 2001 Isuzu Trooper with 4-Way Trailer Connector
- Q&A: Prodigy P2 Showing 0.0 and No Power to Brakes on Trailer
- Q&A: Tekonsha Prodigy P2 Trailer Brake Controller Shows 0.0 After Sleep Mode
- Q&A: Does the Ground Wire On the 7-Way Need to Run to the Battery
- Q&A: Prodigy P2 Brake Controller Flashing Between C and 0.0 and Not Applying Trailer Brakes
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Shop: Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs
- Video: Mount-n-Lock GennyGo RV Bumper-Mounted Generator and Cargo Carrier Kit Review
- Search Results: 44649
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Video: Lippert Solera Slider Slide-Topper Review
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 68149
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Shop: Gooseneck Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Titan Trailer Brakes T2385200 Review
- Search Results: 25580
- Article: My Trailer Hitch Doesn't Fit
- Shop: Grease Seals 10-36 (pair)
- Search Results: dust cap
- Video: Solera Replacement Awning Fabric Measurement and Installation
- Shop: Fifth Wheel Hitch