Bracket Kit To Install Draw-Tite Hide-A-Goose Gooseneck Hitch on 2013 Ford F250

Question

Question:

Hide-A-Goose Underbed Gooseneck Trailer Hitch with Installation Kit Item # 9460-49 I need the installation kit for this Draw-Tite Hide-A-Goose 30,000 pound gooseneck head. I cannot find whether or not you sell JUST the installation kit and not the entire hitch and installation kit. Will you help me by pointing out the product number of the installation kit I need for a 2013 F250 short-bed? Thanks

asked by: Bryan H

0

Expert Reply:

The correct kit needed to install the # 9460 Draw-Tite Hide-a-Goose Gooseneck Hitch on your 2013 Ford F250 short bed is part # 4449. This is the install bracket and hardware minus the hitch.

If you don't have one already, you can install a 7-way trailer connector in the bed of your truck using part # 50-97-410.

I've linked to installation videos for the hitch and the trailer wiring harness.

expert reply by: Mike L

0

Answer 1

The Curt gooseneck rail kit you mentioned does not fit your 2005 Ford F-250 short bed and also this is just a rail kit and not a complete hitch setup. For a Curt folding hitch that does fit your truck you'd want the part #C61332-52. Or for just…

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Answer 5

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The trailer hitches that fit a 2023 Ford Escape will not fit the Plug-In Hybrid version so we'll need to look into some alternative options so you can carry your extra cargo. If you just need to carry some bikes then I recommend getting the…

view full answer...

Answer 8

When installing the Tekonsha Prodigy P2 Trailer Brake Controller #90885, we need go back under the dash to find the factory wiring on your truck. Now it's located behind the dash underneath the steering wheel just a little towards the left and a…

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

It sounds like you are looking for the replacement key from Reese. Reese is a sister company of Fulton and Tow Ready who is now carrying the Gorilla Guard Coupler Locks #63228 and #63227. Replacement keys are no longer available so replacing the lock…

view full answer...

Answer 11

Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for Advent…

view full answer...

Answer 12

If by serial number you mean VIN and the trailer manufacturer is still in business then yes, you would likely be able to obtain the bearing numbers from the manufacturer. If none of the above are true, then the only other way to determine which…

view full answer...

Bracket Kit To Install Draw-Tite Hide-A-Goose Gooseneck Hitch on 2013 Ford F250

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching