Solution for Replacing Mobile Home Axles on Trailer So Wheels with Jeep Bolt Pattern Can be Ran
Question:
I think I have a mobile home axle on my trailer, and I want to put Jeep wheels and tires on it. What can I buy to make this work. I can send pictures as well. Thanks
asked by: Richard J
Expert Reply:
You'll need new axles. There aren't hubs that are going to fit your mobile home axles since they are one time use. So to get the right hubs you'd have to go with new axles.
The Jeep wheel bolt pattern is 5 on 5 inch which we do have a way to accomplish what you are wanting.
For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # AKHD-550-35-EZ-K. This hub includes the bearings that the Timbren is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
Then for self-adjusting brake assemblies you'd want the part # 23-469 for the right hand side and then # 23-468 for the left hand side.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: Can Brakes Be Added to the 2K Timbren Axle-Less Trailer Suspension System
- Q&A: Installing a Timbren Silent Ride System
- Q&A: Adding Crossbars To A Teardrop Trailer
- Q&A: Using Wheels From Jeep Wrangler on Tandem Axle Trailer
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Article: Where to Position the Trailer Axle?
- Q&A: Would Timbren Axle Less System for Wide Tires Allow for Wider Tires, How Much Clearance is Provided
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure a Trailer Axle