What Size Bar Latch Can Fit Into Global Link Vise Lock # 295-000026

Question

Question:

Hello, How large of a door latch bar will this accept? For example will it accept a 1.5inch wide bar? Thanks!

asked by: Zane

0

Expert Reply:

The tallest bar latch that can fit into the Global Link Vise Lock # 295-000026 that you referenced is 1-1/4 inches.

expert reply by: Jameson C

0

Answer 1

While doing on research on this product I contacted the manufacturer that assembles this product. They confirmed that yes, the Shim for Narrow Bracket Strap Hinge Stainless Steel #PLR2001-SS will work. It adds 1/8" shim for the 36"…

view full answer...

Answer 2

I reached out to my contact at Global Link and the Global Link Vise Lock for Cam-Action Door Latch - Keyed Alike Option - Black #295-000024 you were looking at is made out of aluminum, not steel. The reason the black version #295-000024 is more…

view full answer...

Answer 3

The hardest to defeat hasp lock for trailer cam latches would be the Blaylock part #BLDL-80 as it basically is a metal fortress that surrounds the latch. The more convenient option would be the Global Link part #295-000026 which is both a latch and…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 5

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

What Size Bar Latch Can Fit Into Global Link Vise Lock # 295-000026

Product Page this Question was Asked From

Continue Researching